ZRPB-170-33-25

Product features:
　Defogging effect: <75mg/Nm3(Dry)
　Pressure drop: <100Pa @5.5m/s
　Carrying speed: 5.5m/s
　Limited droplet size: 26µm @4.5m/s

Category:

Flat defogger

Keywords:

Environmental Protection Equipment

Service Hotline:

0086-317-7666022

Product Inquiry

Product Introduction

Features:	Material:	other:
Defogging effect: <75mg/Nm3(Dry)	FRPP、316L、FRP901、2205、304	On-site guided installation service
Pressure drop:<100Pa @5.5m/s	Material can be selected according to customer requirements	Impact test: (VDI3679, German standard)
Carrying speed: 5.5m/s		Gas uniform distribution device (optional)
Limit droplet size: 26µm @4.5m/s

The flat-plate mist eliminator is suitable for absorption towers with medium and low gas velocity. Generally, it adopts the design configuration of two-stage mist eliminator and three or four-stage backwashing; it is installed on the top of the absorption tower and consists of standard modules and edge modules. One-level or multi-level combination mode can also be used according to actual working conditions.

Technical features of Zhongrui flat-type mist eliminator: Each group of mist eliminators can be connected horizontally and vertically in the desulfurization tower. The tower wall can also be connected and fixed to the tower wall ring plate to realize the entire tower connection. The service life, pressure resistance, and defogging efficiency of the mist eliminator reach high standards.

None

Product Inquiry

Please provide your phone number and email address—we’ll use this information to contact you promptly and resolve your issue as soon as possible.

Submit