Many desulfurization industrial productions require the participation of this demister, because as long as it is a production process related to this chemical raw material, some more harmful water mist will be generated. These water mist are not pure water, but It is doped with some solid substances, and many substances are chemical agents, so the ability to make corrosive is still very large, so if the absorption tower is in such a working environment, it will cause the parts inside to be corroded Even some steel and other materials cannot be avoided, because such corrosive chemicals are very harmful, and steel cannot withstand it. Therefore, once the components are corroded, the absorption tower cannot continue to work because of any If the surface of some parts is corroded, the entire market will stop. After all, all parts are working together. If there is a problem in any link, it will not work.
The function of the mist eliminator is to separate some substances. For example, the components contained in such water mist are very complex, not only some water vapor, but also some droplet substances. Therefore, the composition of these water mist is not single. It has some other properties. For example, these droplets are very corrosive. Therefore, the various parts in the absorption tower are inevitably corroded. In this way, these parts naturally cannot be smoothly supported. It is working, so corrosive substances cannot be left in this working environment, otherwise the machine will be damaged; and these droplets can be well attached to the surface of some parts, so if it is attached to the flue If the surface of the flue is too high, then the flue cannot work smoothly, because if there are too many stains, it will cause some blockage of the flue mouth, so if the smoke generated in the absorption tower does not diffuse out, this flue is equivalent to a display, naturally It is not allowed.
After analyzing the consequences of not removing the water mist, the two hazards are not allowed. Then the demister is in production and must be equipped. No matter it is this type of demister, the price is It is not very reasonable, or it requires a lot of capital. Industrial manufacturers need to purchase it, because only by relying on such a machine can the purpose of removing water mist can be achieved, so that it can protect and absorb well. All the parts inside the tower are not corroded, and there is no stains attached.
Therefore, if such a demister is not purchased, the consequences are conceivable, and there is no need to take a fluke. If the manufacturer feels that there is no such demister equipment, it can still make industrial desulfurization and other projects smoothly. If you proceed, it means that the manufacturer may suffer a lot of capital expenditure because of this, because such negligence is very serious. Once the machine in the production of the machine is partially corroded, the machine needs to be replaced, and the production process cannot continue. Only after these machines are repaired can they continue to work, so if the project is delayed in this way, the loss will not be small. Moreover, the price of such defogging equipment is quite reasonable.